Neo Craft 3D Apex Pro Color
Enclosed multicolor CoreXY 3D printer for a wider range of materials.
Enclosed CoreXY multicolor printing: an enclosed frame, a 320 °C (608 °F) hotend and filament drying while you print.
- 4-color printing — expandable to 8 with a second color unit (sold separately)
- 250 × 250 × 250 mm (9.8 × 9.8 × 9.8 in) build volume
- Hotend up to 320 °C (608 °F) for PLA, PETG, TPU, ABS and ASA
- Automatic leveling and flow calibration
- Built-in camera with AI spaghetti detection and remote monitoring
Free PLA starter pack
10 colors × 10 m (33 ft) of 1.75 mm PLA filament, so you can start printing on day one.
Included with every printer. May ship in a separate package.
Order today — estimated delivery
8–16 business days
Processed in 1–2 business days, then 7–14 business days in transit to US addresses.
Neo Craft 3D Apex Pro Color
- Free US shippingOn orders over $35
- 30-day returnsUnused, in original packaging
- Damage & defect coverReport within 7 days of delivery
- Secure checkoutEncrypted, hosted by Shopify
- Email supportQuestions before or after you order
Why choose the Apex Pro Color
-
Enclosed CoreXY
An enclosed frame with a CoreXY motion system, rated up to 600 mm/s.
-
Engineering materials
A 320 °C (608 °F) hotend for PLA, PETG, TPU, ABS and ASA.
-
4 to 8 colors
4-color printing included, expandable to 8 with a second color unit.
-
Remote monitoring
Built-in camera, AI spaghetti detection and power-loss recovery.
Is this printer right for you?
A great fit if you want to…
- Print engineering materials such as ABS and ASA
- Make multicolor parts and prototypes with less manual work
- Run long jobs and monitor them remotely
- Hobbyist
- Advanced
- Small business
Key specifications
- Technology
- FDM, multicolor, enclosed CoreXY
- Build volume
- 250 × 250 × 250 mm (9.8 × 9.8 × 9.8 in)
- Colors per print
- 4 included, up to 8 with a second color unit
- Max print speed (rated)
- 600 mm/s (300 mm/s recommended)
- Max acceleration (rated)
- 20,000 mm/s²
- Max hotend temperature
- 320 °C (608 °F)
- Heated bed
- Up to 120 °C (248 °F), PEI surface
- Materials
- PLA, PETG, TPU (direct only), ABS, ASA
- Leveling
- Automatic, with flow calibration
- Monitoring
- Built-in camera, AI spaghetti detection, remote monitoring
- Filament drying
- Up to 55 °C (131 °F) while printing
- Print protection
- Filament runout detection, power-loss recovery
Specifications are the hardware manufacturer's published ratings. Maximum speeds are not typical print speeds.
Compare multicolor printers
Printers that combine up to 4 colors in one job, side by side. *TPU prints directly, not through the multicolor system.
Swipe the table sideways to see every model.
| You're viewing | |||||||
|---|---|---|---|---|---|---|---|
| Technology | FDM, multicolor | FDM, multicolor | FDM, multicolor | FDM, multicolor, enclosed CoreXY | FDM, 4 toolheads | FDM, multicolor, enclosed CoreXY | FDM, multicolor, enclosed CoreXY |
| Best for | Multicolor at a lower price | 4 colors on a compact printer | Beginner multicolor with minimal setup | Demanding multicolor work and more materials | Multicolor and multi-material with separate toolheads | Engineering filaments in color | Large engineering-grade parts |
| Build volume | 260 × 260 × 260 mm (10.2 × 10.2 × 10.2 in) | 220 × 220 × 220 mm (8.7 × 8.7 × 8.7 in) | 260 × 260 × 255 mm (10.2 × 10.2 × 10.0 in) | 250 × 250 × 250 mm (9.8 × 9.8 × 9.8 in) | 256 × 256 × 256 mm (10.1 × 10.1 × 10.1 in) | 270 × 270 × 256 mm (10.6 × 10.6 × 10.1 in) | 390 × 390 × 340 mm (15.4 × 15.4 × 13.4 in) |
| Colors per print | 4 included · up to 8 with a second color unit (sold separately) | 4 | 4 | 4 included · up to 8 with a second color unit (sold separately) | 4, one toolhead per color | Multicolor filament box included | Multicolor filament box included |
| Materials | — | PLA, PETG, TPU, PLA-CF, PETG-CF | — | PLA, PETG, TPU*, ABS, ASA | — | PLA, PETG, ABS, ASA, TPU, PA, PC, CF/GF | PLA, PETG, ABS, ASA, TPU, PA, PC, CF/GF |
| Bed leveling | Automatic, 49-point | One-click automatic | Automatic + Z-offset + input shaping | Automatic + flow calibration | Automatic calibration | Automatic | — |
| Camera & remote | 720p camera, AI spaghetti detection | — | AI camera, failure detection | Built-in camera, AI spaghetti detection, remote monitoring | — | — | — |
| Max speed (rated) | 600 mm/s | 600 mm/s (300 mm/s in color) | — | 600 mm/s | — | 600 mm/s | 800 mm/s |
| Notable | Filament drying up to 65 °C (149 °F) · 45 dB in silent mode | Nozzle up to 300 °C (572 °F) · Wi-Fi and USB | Direct-drive extruder · RGB status light | Hotend up to 320 °C (608 °F) · filament drying while printing (up to 55 °C / 131 °F) | Automatic tool switching · quick-swap nozzles | Heated chamber up to 65 °C (149 °F) · hotend up to 370 °C (698 °F) | Heated chamber up to 65 °C (149 °F) · 370 °C (698 °F) nozzle · air filtration |
Specifications are the hardware manufacturer's published ratings. Maximum speeds are not typical print speeds.
What happens after you order
View shipping details-
1. Order placed
You'll receive an order confirmation by email.
-
2. Processing
1–2 business days
Your order is prepared by our fulfillment partner in China.
-
3. Delivery
7–14 business days
US addresses only. Tracking is emailed when your order ships.
-
4. Support
Questions or a problem on arrival? Email us and we'll help.
Frequently asked questions
Which materials can it print?
PLA, PETG, TPU, ABS and ASA. The hotend reaches up to 320 °C (608 °F). TPU should be printed directly rather than through the multicolor system.
Can I monitor prints remotely?
Yes. A built-in camera, remote monitoring, filament detection, AI spaghetti detection and power-loss recovery help you keep long prints on track.
How is it different from the Creator X4 Color?
The Apex Pro Color is enclosed, uses a CoreXY motion system and has a 320 °C (608 °F) hotend, so it handles ABS and ASA. The Creator X4 Color costs less and has a slightly larger build volume. Compare all printers.
How long does delivery take?
Orders are processed within 1–2 business days and ship from our fulfillment partner in China to US addresses only. Delivery then takes 7–14 business days, so plan on 8–16 business days from order to doorstep. You'll get a tracking number by email when your order ships. Our shipping policy states that import duties or fees, if any apply, are paid by the customer. Read the shipping policy.
Can I return it?
Yes. Unused items in their original packaging can be returned within 30 days of delivery; return shipping is paid by the customer. If your order arrives damaged or defective, contact us within 7 days of delivery with photos and we'll arrange a replacement or a full refund at no cost to you. Refunds are issued within 5–10 business days after we receive the return. Opened filament can't be returned unless defective. Read the return policy.
Is there a warranty?
We don't provide a written warranty of our own. Here's what we commit to: if your order arrives damaged or defective, tell us within 7 days of delivery (photos help) and we'll replace it or refund it in full, at no cost to you. Unused items in their original packaging can be returned within 30 days of delivery. Questions about a specific issue? Contact us.
Related products
-
Multicolor FDM
Neo Craft 3D Creator X4 Color
Multicolor printing with camera monitoring.
$359.00 Free US shipping -
